XMT-908 series temperature controller

XMT□-908

Technical specification  

1, Measurement deviation: ≤±0.5%F·S±1B

2, Cold end compensating deviation: ≤±2.0℃

3, Sampling cycle: 0.5S

4, Control cycle: relay output 2～120S , other is 2S.

5, Relay output contact capacity: AC220V/5A (resistance load) or AC220V/0.3A (perceptual load).

6, Driving controllable pulse output: ≥3V scope, ≥40us width’s over zero or trigger contact pulse.

7, Driving solid relay signal output: driving electric current≥15mA, voltage≥9V.

8, Continuous PID: 0～10mA (load 500±200Ω), 4～20mA (load 250±100Ω), or 0～5V (load≥100kΩ) , 1～5V (load≥100kΩ).

9, Power supply: AC85V～242V, 50/60Hz.

10, Working condition: temperature 0～50.0℃, relative humidity≤85%RH, without corrode and strong electric radiation.

Product code:

XMT  □   9   □   8   □  

(1)  (2)  (3)   (4)  (5)

(1) Frame dimensions (mm)

“A” = 96×96×110

“D” = 72×72×110

“E” = 48×96×110

“F” = 96×48×110

“G” = 48×48×110

“S” = 80×160×130

(2) “9” = Serial number, PV and SV display with 4 digits

(3) Alarms

“0” = no set alarm

“1” = one alarm

“3” = two alarms (upper limit, lower limit, deviation alarms)

“5” = voice alarm

(4) Input

“8” = universal input model

(5) Output 

Blank = Relay contact output       

“A” = Single-phase over-zero trigger adjustment

“A3” = Three-phase over-zero trigger adjustment

“B” = Single-phase shift-phase trigger adjustment

“B3” = Three-phase shift-phase trigger adjustment

“C”= 0-10mA or 4-20mA constant output

“G” = solid state relay output